Make your own free website on Tripod.com
...

Wireless Telephone Eavesdropper

...
The IR transmitter connects to a telephone circuit, and transmits both sides of all telephone conversations to any line-of-sight location, within 40 feet. No power is taken from the central office, as long as all phones remain on-hook. The current flows through the phone and back to the central office, thereby keying their equipment. We tap into the telephone line by connecting the IR transmitter circuit in series with either the tip or ring. When the telephone is off-hook, current will flow through the diode bridge polarity protector and supply the power for the IR transmitter. The phone's audio information is taken off the line by transformer T1. The 1000-W winding of the transformer connects to a two-stage transistor audio amplifier/modulator. A 2000-W potentiometer could be added to the input of the two-stage amplifier to control the modulation level, and another potentiometer could be added in place of R3 to adjust the IR's idle current.


Parts List:
Component: Value: Datasheet: Qty:
Resistor

3.3K

Not Available 01
Resistor

100K

Not Available 01
Resistor

220K

Not Available 01
Resistor 270 Not Available 01
Capacitor 4.7uF Not Available 02
Capacitor 470 Not Available 01
Diode 1N914 Available 04
Zener 5V Not Available 01
Transistor 2N2222 Available 02
Transformer 1,000:8 Not Available 01